Herunterladen Inhalt Inhalt Diese Seite drucken

Changing The Temperature Scale - Braun No touch + forehead NTF 3000 Anleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
In the following situations it is recommended that three temperatures in the same location be taken and
the highest one taken as the reading:
Newborn infants in the fi rst 100 days.
Children under three years of age with a compromised immune system and for whom the presence or
absence of fever is critical.
When the user is learning how to use the thermometer for the fi rst time until he/she has familiarized
himself/herself with the instrument and obtains consistent readings.
General precautions:
Remove any sweat prior to measuring with a dry cloth.
Avoid any cooling or warming cloths on the forehead for at least 30 minutes prior to measurement.
Do not take temperature measurements over scar tissue, open sores or abrasions.
Keep the measurement sensor and lens clean. Avoid directly touching the sensor or lens.
Always store the thermometer with the protective cap in place to prevent dirt and scratches from
damaging the device.
Make sure to remove the protective cap before taking a measurement and to put the cap back on after
using the thermometer.

Changing the temperature scale

Open battery compartment and remove
1
the batteries.
°C / °F switch is accessible in the center of
2
the battery compartment.
Slide switch to °C or °F to set preferred
3
temperature scale.
Replace the batteries and close the
4
battery door.
8
Celsius
Fahrenheit
Changing the sound mode
The Braun No touch + forehead thermometer allows you to silence
the beeps on the thermometer to avoid waking a sleeping child.
To activate the silence feature, slide the switch to the silent mode
position and take a temperature reading. An icon will appear on the
screen to indicate that the thermometer is in silent mode.
Calibration
This device was designed and manufactured for a long service life, however it is generally recommended
to have the device inspected once a year by the Authorized Service Center located in your country to
ensure correct function and accuracy.
Note: The accuracy checking is not a free service and therefore we recommend that you contact the
Authorized Service Center to get a quotation before you send out the product.
This device is not intended as a substitute for regular check-ups by your doctor, please consult your
doctor if you have any doubt about the temperature reading.
LOT and Serial numbers of your product must be provided as they are essential to record and follow up
your inquiry or claim.
The LOT and Serial numbers are located in the battery compartment.
The production date is given by the LOT number and can be deciphered as explained below:
The fi rst 3 numeric digits in the LOT number represent the day of the year of manufacture.
The next 2 numeric digits represent the last two numbers of the calendar year of manufacture and the
letter(s) at the end designate the manufacturer of the product. (E.g.: LOT No.: 12313tav this product was
made on the day 123, year 2013 at the manufacturer code tav.)
Guarantee
Consumer Card available on our website at www.hot-europe.com/after-sales
Please see last page of this manual to fi nd the contact for the Kaz Authorized Service Center in your
country.
UK only: This guarantee in no way aff ects your rights under statutory law.
9

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis