Herunterladen Inhalt Inhalt Diese Seite drucken

Errors And Troubleshooting; Care And Cleaning; Replacing The Batteries - Braun No touch + forehead NTF 3000 Anleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10

Errors and troubleshooting

Error Message
Situation
When 20% of battery life is left, the
display fl ashes the low battery warning
symbol; however, the device can still
work until the battery life has 0% left.
If the steady battery icon is
the only symbol shown on the display,
the device cannot work. The battery
should be replaced immediately.
This message displays when the
measured temperature is lower than
34.4 °C (93.9 °F) or higher than 42.2 °C
(108 °F) or when the room temperature
is outside the operating range of
15 °C – 40 °C (59 °F – 104 °F).
Blank display. Thermometer does not
have power.
10
Solution
Replace batteries.
Replace batteries.
Re-measure the temperature,
carefully following the instructions
in "How to use" section.
Please check if the batteries have
been loaded correctly. Also check
polarity (<+> and <–>) of batteries.
Contact customer service if
thermometer still does not
function.

Care and cleaning

Use an alcohol swab or cotton swab moistened with alcohol (70% isopropyl) to clean the thermometer
casing and the measuring probe. Ensure that no liquid enters the interior of the thermometer. Never use
abrasive cleaning agents, thinners or benzene for cleaning and never immerse the instrument in water
or other cleaning liquids. Wait 10 minutes after cleaning before taking a temperature measurement.
Make sure to replace the protective cap after use to prevent scratches or damage from occurring to the
thermometer.
Never insert a sharp object into the scanner area or any other open surface on the thermometer.

Replacing the batteries

The No touch + forehead thermometer comes with 2 AA batteries. Replace with 2 new AA batteries when
the fl ashing battery symbol appears on the LCD display. To change the batteries, slide open the battery
cover and remove batteries. Replace the batteries being sure to align properly as indicated inside the
battery compartment. Remove the battery from the product if it is not required for extended periods of
time in order to avoid damage to the thermometer resulting from a leaking battery.
To protect the environment, dispose of empty batteries at appropriate collection sites according
to national or local regulations.
11

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis