Memory Mode; Changing The Temperature Scale - Braun Pro3000 Bedienungsanleitung

Memory mode

The last temperature taken before the thermometer powers down is
stored in memory. To enter the memory mode, press the
button.
The last stored temperature is displayed along with the MEM symbol.
Even in memory mode, a new temperature can be taken provided
that the ready symbol
To quit the memory mode, press the
LCD light
for easy nighttime reading

Changing the temperature scale

This thermometer is shipped with the Celsius temperature scale
activated. If you wish to switch to Fahrenheit ( °F ), proceed as
follows:
Turn on the thermometer.
ø
( If it is already turned on, make sure it is not in memory mode.)
Press the /mem button and keep it pressed. Then press and
ø
release the activation button to switch over to the «change
temperature scale» mode.
By pressing the activation button again, the Fahrenheit scale is
ø
activated, «°F » is displayed on the LCD. Each further pressing
of the activation button toggles the scale between °C and °F.
Release the /mem button to return to the ready symbol
ø
The temperature stored in memory will automatically be converted
to the selected scale when displayed on the LCD.
is shown.
/mem button again.
/mem
.
9