Conrad 67 17 16 Bedienungsanleitung Seite 29

Setting the dual time
With this function, you can set a second time in a different time zone, e.g. Hong
Kong or New York.
Display: DUAL TIME
You can set the dual time with the button MODE
by keeping it depressed for approx. 3 seconds.
The hour display starts to flash.
Now make your setting with the arrow buttons S / F.
Press the MODE button again; the minutes start to flash.
Now make your setting with the arrow buttons S / F.
By pressing the button MODE again, you can confirm this
entry.
Background illumination
Press the button (1) - the background illumination turns on
and then off again automatically after approx. 5 seconds.
Selection °C or °F
By pressing the button °C/°F, you can select between the
display of the temperature in degrees Celsius or degrees
Fahrenheit.
Night illumination
If this function is activated, the night illumination turns on automatically at darkness so
that you can still comfortably read the display at night. The integrated light sensor
ensures that the night time illumination is deactivated during the daytime.
To read the display more comfortably, the housing has a flat bottom
28