Conrad 67 17 16 Bedienungsanleitung Seite 28

Alarm repeat / Activating/deactivating Alarm 1/Alarm 2
When Alarm 1 / Alarm 2 sounds, the corresponding icons blink as well
/
- Press the button
- Press the button (1). The alarm is interrupted and the background illumination
turns on for five seconds. After approx. 4 minutes, the alarm sounds again. This
way, you can repeat the alarm up to 7 times.
- If the alarm is not interrupted or deactivated, the automatic cutoff ensures that the
alarm is turned off after approx. 4 minutes.
Setting a foreign time
If daylight savings time is activated, the clocks are set ahead one hour. This function
allows you to set the original time (winter time) again by setting the clock back one
hour. Some countries do not have daylight savings time, e.g. England.
Press and hold the button S for approx. 3 seconds - the symbol
Now press and hold the button MODE for approx. 3 seconds - the hour starts to
blink. With the help of the arrow buttons S / F, you can set a different time (hour).
With each press of the button, the hour display moves forward or back one hour
each.
Press the MODE button again to confirm the set time.
Press and hold the button S for approx. 3 seconds to switch between the display of
your local time and the foreign time.
to turn the alarm off.
appears.
27