Conrad 67 17 16 Bedienungsanleitung Seite 27

Setting – Alarm 2:
Display: ALARM 2
Press the MODE button for approx. 3 seconds. The hours start to blink and can be
changed with the arrow buttons S / F.
If you press the MODE button again, the minutes start to blink on the display. These
can also be changed with the arrow buttons S / F.
Press the MODE button again to confirm your setting!
Activation Alarm 1 / Alarm 2:
The button with the bell icon is located on the front of the
housing below the display.
Press the button with the bell icon
.
- Alarm 1 is activated and the display shows the icon
Press the button with the bell icon again - Alarm 2 is acti-
vated and the display shows the icon
If you press the button with the bell icon again, Alarm 1
and Alarm 2 are activated and both icons appear on the dis-
play.
If you press the button with the bell icon
again, Alarm 1 and Alarm 2 are deactivated and both icons
disappear from the display.
26