HP OfficeJet 7510 series Handbuch Seite 4

Fax
Set up fax
1
Connect the phone line
Using the phone line for fax only
If a phone cord is provided with the printer, HP recommends that you use this phone cord. If the phone cord is not long
enough, use a coupler and another phone cord to extend.
1. Connect one end of the phone cord to the phone wall jack.
2. Connect the other end to the port labeled 1-LINE on the back of the printer.
DO NOT insert the phone cord into the port labeled 2-EXT.
3. If you have subscribed to a DSL/ADSL service, connect a DSL/ADSL filter between the
printer port labeled 1-LINE and the phone wall jack.
2
Connect additional devices
If you have other devices to connect, connect them as shown in the diagram below:
5 4
1
8
5
* TAM: Telephone answering machine
** Fax on VoIP: Fax on Voice over Internet Protocol
4
2
1-LINE
1
1-LINE
2-EXT
1-LINE
10
2-EXT
Fax on VoIP**
1
1
Phone wall jack
Port labeled 1-LINE on the back of the printer
3
2
DO NOT insert the phone cord into the port
labeled 2-EXT.
DSL/ADSL filter (provided by the telephone
3
company or service provider)
1
1
1-LINE
2 3
9
1-LINE
6
2-EXT
5 7
1-LINE
6
5
7
1
Phone wall jack
2
Parallel splitter
3
DSL/ADSL modem
4
Telephone answering machine
5
Telephone
6
ISDN wall jack
7 Terminal adapter or ISDN router
8
Broadband modem
9
DSL/ADSL filter
10
Analog telephone adaptor