Facom 1003A.E Bedienungsanleitung Seite 9

Contents
1. Introduction
2. Technical Data
3. Safety information
4. Starting operation
5. Functional description
6. Error diagnosis and Troubleshooting
7. Maintenance
1. Display
2. Supply unit
3. Control buttons
4. Holder
5. Tip magazine
6. Soldering tool
7. Soldering tip
8. Sponge bin
1. Introduction
1.1 Supply Unit
The use of a microprocessor facilitates operation and sets new
standards for the functions available at the soldering station. Five
independent tool settings can be made and saved by means of a
simple menu guide.
The 1003A.E can be operated with various soldering tools. Besides
the universal soldering irons, the fi ne-pitch soldering iron can be
connected to the station for processing SMCs. The soldering station can
NU-1003A.E_0208.indd 9 NU-1003A.E_0208.indd 9
EN
9. Viscose sponge
10. Power switch
11. Potential equalization jack
12. Soldering iron plug
13. Soldering iron connecting cable
14. Fuse / fuse holder
15. Power cord
16. Power plug
be used for simple temperature measurements when a temperature
sensor is connected as tool (Pr5).
A wide variety of functions, high speed and control precision make
this soldering station especially suitable for manufacturing processes
subject to stringent quality requirements.
Equipment features:
• Antistatic desing
•
• Potential equalisation
• Full-wave control
• 24 V small voltage for soldering iron
• VDE-GS, CE, VDE-EMC marks of conformity
1.2 Soldering iron
The 1003A.80E is an extremely sturdy soldering iron with high
thermal output. The tool is superbly suited for soldering switches,
cables and connectors, and for all soldering operations with major
heat requirements.
2. Technical data
Electronics station
Supply voltage: 230 V~, 50-60 Hz
Secondary voltage: 24 V~
Output: 80 W
Control technology: SENSOTRONIC with digital PID behaviour
Temperature range: continuous, 50° C – 450° C / 122° F – 842° F
Function display: 4-character LED display with menu control
Cable: 2m PVC with device socket
Design: antistatic according to MIL-SPEC/ESA standard
Fuse: 400 mA, delayed-action
Soldering iron 1003A.80E
Voltage: 24 V~
Output: 105 W / 280°C (536° F) – 80 W / 350° C (662° F)
Heat up rating: 290 W
Heat up time: approx. 40 s (to 280°C)
Weight (without cable): approx. 50 g
Cable: 1.5 m ultra-fl exible, heat-resistant, antistatic
Design: antistatic according to MIL-SPEC/ standard
3. Safety instructions
For safe use of these soldering irons, these safety instructions should
be carefully read and followed.
• Usage. Using a unit for applications other than those for which
it is intended, or when damaged, will cancel the manufacturer's
warranty and liability.
• Inspection of all components before use. Any faulty component
should be replaced by a specialist or the manufacturer.
Faulty repairs may be dangerous for users. Always use genuine
Facom replacement parts.
• Heating. Before switching on, ensure that the tip is correctly
fi tted to the unit. Never let a soldering or modelling tip come into
contact with skin, hair or any other heat-sensitive or fl ammable
20/03/2008 14:03:15 20/03/2008 14:03:15