Service Functions; Reset; Firmware Update; System Monitor - Auerswald Analog/ISDN Converter Installations- Und Bedienungshandbuch

Call Back: The Analog/ISDN Converter enables
the translation of the feature CCBS (callback on
busy).
If you activate the feature CCBS, you may enter a
digit sequence to start a callback. Ask your analog
network provider about the necessary digit
sequence and enter it into the corresponding field.
"R" is entered as a placeholder for a
Flash and a " ," (comma) for a break of
a second.
Besides this the busy tone detection has to be
activated under "External connections...Analog
connections".

Reset

In case of a Reset all connections are discon-
nected, the configuration is unharmed. A Reset
can be started via the PC program as follows:
1. Click Service and Reset in the menu.

Firmware Update

If the device does not have the most current
firmware, a new version may be saved into the
device via PC program:
1. Click Service and Write FLASH to Con-
verter... in the menu.

System Monitor

The PC program offers a system monitor for serv-
ice matters. If necessary, you will get more details
from the service staff of the technical hotline.
CLIR: The Analog/ISDN Converter enables the
activation of the feature CLIR (on-request presen-
tation suppression of the own telephone number).
If you activate the feature CLIR, you may enter a
digit sequence to start a call with telephone
number presentation suppression. Ask your net-
work provider about the necessary digit sequence
and enter it into the corresponding field.

Service Functions

Configuration, PC Program
"R" is entered as a placeholder for a
Flash, an "n" for the number and a " ,"
(comma) for a break of a second.
55