Configure Features - Auerswald Analog/ISDN Converter Installations- Und Bedienungshandbuch

54

Configure Features

The Analog/ISDN Converter translates ISDN fea-
tures of the ISDN device to features of the analog
network provider.
Make sure with help of the manual of the con-
nected ISDN device that it supports the corre-
sponding ISDN features.
Ask your network provider which features are sup-
ported by the analog central office and which digit
sequences are necessary for the operation.
If the connection to the ISDN device is
configured as a PtP connection, only
the features AOCD, CLIR and CLIP of
the analog central office will be supported.
Call Forwarding (CF): The Analog/ISDN Con-
verter enables the translation of the features CFU
(CF unconditional), CFB (CF on busy) and CFNR
(CF on no reply).
If you activate each of these three features, you
will be able to enter two digit sequences for each
features - one for the activation of the call forward-
ing including entering the destination number and
one for the deactivation of the call forwarding.
Ask your analog network provider about the nec-
essary digit sequences and enter them into the
corresponding fields.
An "n" is entered as a placeholder for
the destination number. This destina-
tion number is sent by the ISDN device
during the activation of this function.
Configure Features
In the manual of Auerswald PBXs the ISDN fea-
tures CFU, CFB and CFNR are named MSN/DDI
Call Forwarding via the central office to make a
difference from other types of CF.
Query & 3PTY: The Analog/ISDN Converter ena-
bles the translation of the features HOLD (Query
and Alternation) and 3PTY (Conference).
If you activate the feature HOLD, you may enter
two digit sequences - one to finish a Query call and
one for the Alternation.
If you activate the feature 3PTY, you may enter
five digit sequences – one to start a conference
and four to finish the conference in different ways.
Depending on the type of finish, the following call
will continue with the first (B) or the second (C)
calling partner. The corresponding other calling
partner will be on hold or disconnected.
Ask your analog network provider about the nec-
essary digit sequences and enter them into the
corresponding fields.
For some of the Auerswald PBXs alternation and
conference are only available as a PBX feature via
the 2nd B-channel.
"R" is entered as a placeholder for a
Flash and a " ," (comma) for a break of
a second.