B) Manually Setting Time And Date - Renkforce 1423362 Bedienungsanleitung

b) Manually setting time and date

If there is no DCF signal, the clock and date can also be set manually.
If the time or date are adjusted manually, DCF reception is deactivated auto-
matically.
• Keep the button "CLOCK SET" (B7) pushed for approx. 2 seconds until the display for
the 12h/24h mode flashes.
• Set the 12h/24h-mode with the buttons "CH +" (B4) and "MEM -" (B6).
In 12h mode, "AM" is displayed to the left of the time during the first half of the day,
"PM" during the second half of the day.
• Briefly push the button "CLOCK SET" (B7); the display for the hours. Set the hours
with the button "CH +" (B4) or "MEM -" (B6).
Keeping the respective button down for some time will adjust them quickly.
This also applies when setting minutes, year, month, date, time zone and lan-
guage for the weekday. If you do not push any button for about 60 seconds, the
projection alarm clock saves all input and leaves the setting mode automat-
ically. If you want to leave setting mode early, keep the button "CLOCK SET"
(B7) pushed for about 2 seconds.
• Briefly push the button "CLOCK SET" (B7) to switch to setting of the minutes. Set the
hours with the button "CH +" (B4) or "MEM -" (B6).
• Briefly push the button "CLOCK SET" (B7); the display for the seconds. You can reset
these to zero with one of the two buttons "CH +" (B4) or "MEM -" (B6). Set one minute
more first when setting the minutes. When the current time has reached this minute,
reset the seconds to zero.
• Briefly push the button "CLOCK SET" (B7), to set the year. Use the buttons "CH +" (B4)
and "MEM -" (B6) again.
• Briefly push the button "CLOCK SET" (B7) again; the setting of the date display will
flash. Use the buttons "CH +" (B4) and "MEM -" (B6) to set whether the day or the
month is to be displayed first in the date.
• Briefly push the button "CLOCK SET" (B7) to switch to setting of the month. Set the
month with the button "CH +" (B4) or "MEM -" (B6) again.
• Briefly push the button "CLOCK SET" (B7); the date flashes. Set it with the button "CH
+" (B4) or "MEM -" (B6) as well.
• Push the button "CLOCK SET" (B7), to adjust the time zone. You can adjust the time
by -23 hours to +23 hours with this. For this, use the buttons "CH +" (B4) and "MEM -"
(B6) again.
46