Security Instructions - Kessel SonicControl Anleitung

Dear customer,
Before you put your KESSEL SonicCon-
trol into operation, please read through
the installation instructions carefully and
follow them.
Check first whether the system has arrived
undamaged. In case of any transport da-
mage, please refer to the instructions in
chapter 12 "Warranty".
1. Safety instructions:
During installation, operation, maintenance
or repair of the system, the regulations for
the prevention of accidents, the pertinent
DIN and VDE standards and directives, as
well as the directives of the local power sup-
ply industry must be heeded.
Before putting the device into operation,
make sure through professional examinati-

1. Security Instructions

on that the necessary protective features
are available. Grounding, neutral, residual
current-operated protective circuit etc.
must correspond to the requirements of the
local power supply industry.
The system must not be operated in poten-
tially explosive areas.
The system contains electric charges. Non-
compliance with the operating instructions
may result in considerable damage to pro-
perty, personal injuries or even fatal acci-
dents.
The system must be disconnected
from the mains before any work is
carried out on it.
It must be ensured that the electric cables
as well as all other electrical system equip-
ment are in a faultless condition. In case of
damage, the system may on no account be
put into operation or must be stopped im-
mediately.
The regulations set out by the directive VDE
0100 must be
heeded. The switch unit must not be instal-
led in rooms where there is an explosion ha-
zard.
The system must be inspected and serviced
regularly to maintain its operational ability.
We recommend that you conclude a servi-
cing contract with your installation com-
pany.
40