Cleaning And Maintenance - EuroLite 51918630 Bedienungsanleitung

Control-channel 8
Control-channel 9
Control-channel 10

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
- Vertical movement (TILT)
head 2
Push slider up in order to
move the head vertically
(TILT).
Gradual head adjustment
from one end of the slider to
the other (0-255, 128-
center).
The head can be stopped at
any position you wish.
- Horizontal movement
(PAN) head 3
Push slider up in order to
move the head horizontally
(PAN).
Gradual head adjustment
from one end of the slider to
the other (0-255, 128-
center).
The head can be stopped at
any position you wish.
- Vertical movement (TILT)
head 3
Push slider up in order to
move the head vertically
(TILT).
Gradual head adjustment
from one end of the slider to
the other (0-255, 128-
center).
The head can be stopped at
any position you wish.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
26/27 00065878, Version 1.0