Closing The Door; Replacing The Lamp; Technical Data; Installation - Küppersbusch IKEF3082Z3 Benutzerinformation

36
Problem

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective door
gaskets. Contact the Service Center.

TECHNICAL DATA

Dimensions of the recess
Rising time
Voltage
Frequency
The technical information is situated on the
rating plate on the internal left side of the
appliance and in the energy label.
INSTALLATION
WARNING! Refer to Safety
chapters.
Possible cause
The food products' tempera-
ture is too high.
Many food products are stor-
ed at the same time.
The thickness of the frost is
greater than 4-5 mm.
The door has been opened
often.
The FastFreeze function is
switched on.
The Intensive cooling function
is switched on.
There is no cold air circula-
tion in the appliance.

Replacing the lamp

The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Service
Center .
Height × Width × Depth (mm):
1780 mm x 560 mm x 550 mm
18 h
230-240 V
50 Hz
Positioning
This appliance can be installed in a dry, well
ventilated indoor where the ambient
Solution
Let the food products tem-
perature decrease to room
temperature before storage.
Store less food products at
the same time.
Defrost the appliance.
Open the door only if neces-
sary.
Refer to "FastFreeze func-
tion".
Refer to "Intensive cooling
function".
Make sure that there is cold
air circulation in the appli-
ance.