Replacing The Lamp; Closing The Door; Technical Information; Technical Data - Küppersbusch IKEF2480-1 Benutzerinformation

Problem
The temperature in the appli-
ance is too low/too high.
If the advice does not lead to
the desired result, call the
nearest brand-mark service.

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective door
gaskets. Contact the After Sales
Service.

TECHNICAL INFORMATION

Technical data

Dimensions of the recess
Height
Width
Depth
Voltage
Frequency
Possible cause
The temperature regulator
is not set correctly.
The door is not closed cor-
rectly.
The food products' tem-
perature is too high.
Many food products are
stored at the same time.
The door has been opened
often.
The IntensiveCooling func-
tion is switched on.
There is no cold air circula-
tion in the appliance.

Replacing the lamp

The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your After Sales
Service.
mm
mm
mm
Volts
Hz
Solution
Set a higher/lower temperature.
Refer to "Closing the door".
Let the food products tempera-
ture decrease to room temper-
ature before storage.
Store less food products at the
same time.
Open the door only if necessa-
ry.
Refer to "IntensiveCooling func-
tion".
Make sure that there is cold air
circulation in the appliance.
1225
560
550
230 - 240
50
29