Replacing The Lamp; Installation; Closing The Door - Küppersbusch IKE458014T Benutzerinformation

Problem
If the advice does not lead to
the desired result, contact the
nearest Authorised Service
Centre.

Replacing the lamp

1. Disconnect the mains plug from the
mains socket.
2. Remove the lamp cover (refer to the
illustration).
3. Replace the used lamp with a new lamp
of the same power and specifically
designed for household appliances. (the
maximum power is shown on the lamp
cover).
4. Connect the mains plug to the mains
socket.
5. Open the door. Make sure that the lamp
comes on.

INSTALLATION

WARNING! Refer to Safety
chapters.
Positioning
This appliance can be installed in a dry, well
ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Possible cause
The food products' tem-
perature is too high.
Many food products are
stored at the same time.
The door has been opened
often.
There is no cold air circula-
tion in the appliance.

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective door
gaskets. Contact the Authorised
Service Centre.
Cli-
mate
class
SN
N
ST
Solution
Let the food products tempera-
ture decrease to room temper-
ature before storage.
Store less food products at the
same time.
Open the door only if necessa-
ry.
Make sure that there is cold air
circulation in the appliance.
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
13