Closing The Door; Technical Data; Product Information Sheet - Küppersbusch FG2500.0i Bedienungsanweisung Mit Montageanweisungen

Problem
Door does not open easily.
If the advice does not lead to
the desired result, call the
nearest Authorized Service
Centre.

Closing the door

1. Clean the door gaskets.

TECHNICAL DATA

Product information sheet

Trade Mark
Model
Category
Energy efficiency class
Possible cause
The door is not closed cor‐
rectly.
The food products' tempera‐
ture is too high.
Many food products are
stored at the same time.
The thickness of the frost is
greater than 4-5 mm.
The door has been opened
often.
The FastFreeze function is
switched on.
There is no cold air circula‐
tion in the appliance.
You attempted to re-open
the door immediately after
closing.
2. If necessary, adjust the door. Refer to
assembly instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
Solution
Refer to "Closing the door".
Let the food products tem‐
perature decrease to room
temperature before storage.
Store less food products at
the same time.
Defrost the appliance.
Open the door only if neces‐
sary.
Refer to "FastFreeze func‐
tion".
Make sure that there is cold
air circulation in the appli‐
ance.
Wait a few seconds between
closing and re-opening of
the door.
Küppersbusch
FG2500.0i
PNC933033615
8. Upright freezer
A++
27