IKEA FROSTFRI Gebrauchsanleitung Seite 10

ENGLISH
After selection of the mode or the
Temperature button the
animation starts
After selection of the
temperature the animation
flashes for a few minutes.
Switching on
1. Connect the mains plug to the power
socket.
2. Press the ON/OFF button if the display
is off.
3. If DEMO appears on the display, the
appliance is in demonstration mode.
Refer to "Troubleshooting" paragraph
(DEMO mode is a function for the
retailer to show the functionality of the
appliance).
The temperature indicators show the set
default temperature.
To select a different set
temperature refer to
"Temperature regulation".
Switching off
Press the ON/OFF symbol for 3 seconds.
The display switches off.
To disconnect the appliance from the
power, disconnect the mains plug from the
power socket.
Bar indicators
The bars guide the user when interacting
with the unit and indicate at what level the
unit is performing. The bars indicate:
• which compartment is in focus (active),
when animation stops
• the desired temperature on the scale
• whether the set temperature is higher or
lower than the previous one (increasing
or decreasing animation).
.
Temperature regulation
Set the temperature of the fridge by
pressing the temperature button.
The default temperature is +5°C for the
fridge.
The temperature indicator shows the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
Free Store mode
This function allows rapid cooling of foods
and more uniform temperature in the
compartment.
To switch on the function:
1. Press the Mode button until the
corresponding icon appears.
To switch off the function:
1. Press the Mode button in order to select
an other function or press the Mode
button until you can see none of the
special icons.
If the function is activated
automatically the Free Store
indicator is not shown (refer to
"Daily use").
The activation of the Free Store
mode increases the energy
consumption.
Eco Mode
For optimal food storage select the Eco
Mode.
1. To switch on the function:
a. Press Mode until the corresponding
icon appears.
The temperature indicator shows the set
temperature:
10