When you have made the desired settings, select DEFAULT (reset), APPLY (apply settings) or EXIT
(leave menu without accepting settings).
LIVE:
DISPLAY TIME WHILE IN VIEW MODE: Displays the time during LIVE view (ON = active, OFF =
DISPLAY TIME WHILE RECORDING:
PRIVACY ZONE:
AUTOSEQ.:
56
The home technology brand for the entire house. More information at www.sygonix.com
Activate (ON) or deactivate (OFF) camera image dis-
plays.
inactive).
Displays the time during recording (ON = active, OFF =
inactive).
Select this menu to indicate a privacy
zone. You can determine up to 4 pri-
vacy zones. A privacy zone will be hid-
den in LiveView and on recordings.
To determine a privacy zone, fi rst set "PRIVACY ZONE" to "ON" for the respec-
tive camera channel (CH1, CH2, CH3, CH4). Then you can check AREA 1, 2, 3
and/or 4. Then select "SETUP" to determine the privacy zone. For this, you
have 1 to 4 squares (depending on how many checkmarks you made).
The area within a square is the privacy zone. The square with the green frame
can be played via drag&drop (keep left mouse button pressed and draw the
square to the desired position; then release left mouse button). Press the
right mouse button when the square is placed accordingly.
You can use this menu to set how
long (in seconds) the different cam-
era images (CH 1 to CH 4) and the
four-fold display are to be displayed
during the switching sequence. Se-
lect the option to deactivate the re-
spective camera input in the switch-
ing sequence.