System Start; System Initialisation; Extensible Screen And Screen Menu - Sygonix 751989 Bedienungsanleitung

9. System Start

9.1 System Initialisation

We recommend that you always format the drive at initial commissioning or when using a
new hard disk. Formatting should be performed with the digital recorder. For this, observe
chapter "10.5 Menu Devices / a) Submenu „HDD"".

9.2 Extensible Screen and Screen Menu

To extend and move back the screen, press the button "Eject" (1).
If the screen is extended, you can use the button "MENU/ESC" (18) to call the screen menu. The
following settings are available (press button "MENU/ESC" (18) repeatedly):
Brightness Brightness adjustment
Contrast Contrast setting
Hue Colour hue
Volume Volume:
Display Mode Screen mode selection
Image Rotation Rotate screen image.
Reset Reset values.
Close Menu Close menu
Use the + and - buttons to set the desired values.
After switching on the H.264 compact digital re-
corder with the "ON/OFF Switch" (22) (for this,
put the switch in the "I" position and ensure that
the digital recorder is properly supplied with volt-
age), the device will initialise. During initialisation,
the digital recorder will recognise the connected
mouse, initialise the system settings and record-
ing parameters, etc.
53