Connection And Installation; Installation Of An Sata Hard Disk - Sygonix 751989 Bedienungsanleitung

7. Connection and Installation

The connection cables must not be kinked or squashed. This can result in malfunctions,
short circuits and defects in the device. No devices with strong electric fi elds such as
mobile phones, radio devices, electric engines etc. must be in the vicinity of the sound
system.
Ensure that the mains adapter is not connected to the H.264 digital recorder during instal-
lation and connection and that the H.264 digital recorder is therefore switched off.
The H.264 digital recorder, the remote control, mouse and the provided mains adapter are
intended for dry indoor use only.

7.1 Installation of an SATA Hard Disk

No SATA-hard disk is supplied with the device. It must be bought separately. An SATA hard
disk up to 1 terabyte can be used.
To ensure proper installation, you need to remove the H.264 compact digital recorder's casing.
The casing of the H.264 compact digital recorder is attached with 4 casing screws on the casing's
bottom.
• Ensure that the mains adapter is disconnected from the digital recorder and that the recorder is
switched off (Switch "ON/OFF" (22) must be in the "O" position).
• Remove the attachment screws of the case.
• Carefully remove the casing by pushing it backwards carefully.
• Connect the SATA plug and the power supply plug to your SATA hard disk.
• Place the SATA-hard disk in the intended installation slot.
• Fasten the SATA-hard disk to the installation slot with suitable screws.
• Push the casing onto the digital recorder again carefully and attach it again by re-fastening the
casing screws you removed before.
50
The home technology brand for the entire house. More information at www.sygonix.com