Checking/Sharpening/Replacing The Blade; Adjusting The Carburettor; Storage; General Storage Instructions - FLORABEST FBM 450 B2 Betriebsanleitung

GB IE NI
• Change the engine oil for the
ing hours then every 50 operat-
ing hours or annually.
• Dispose of the used oil in an eco-
friendly manner (see "Disposal/
Environmental protection").
1. Remove the spark plug connector (
12) (see "Maintaining the Spark Plug").
2. Open the oil tank cover (
pump out the motor oil with an oil
pump.
3. R
tion").
Checking/Sharpening/
Replacing the Blade
Only allow specialist companies to
install and dismantle the knife.
W ear gloves when handling the
blade.
• Take off the spark plug connector (
12) and check the blade for wear and
damage.
• Always have a blunt blade r esharpened
by a specialist company, as an imbal-
ance check can be carried out there.
• Always have a specialist workshop
change a damaged or imbalanced
blade.
Incorrect installation can re-
sult in serious injury.

Adjusting the Carburettor

The carburettor has been preset in the fac-
tory for optimum performance. If readjust -
ments are required, have the adjustments
made by a specialist workshop.
36

Storage

-

General Storage Instructions

19) and • Clean and service the equipment before
storage.
• Allow the engine to cool before storing
- the equipment in enclosed areas.
• Use suitable and authorised containers
for storing fuel.
• Keep the equipment in a dry place that
is protected from dust and out of reach
of children.
• Do not wrap the equipment in nylon
bags as damp and mould could form.

Fold up device

For space-saving storage the grip rod can
be folded twice.
P
Storage during the winter
break
Do not store the equipment
with a full collection box. In
hot weather, the grass begins
to ferment when heat is gen-
1. Remove the grass catcher (20).
2. Hang out the starter cord (
3. Open the quick clamping cable
levers (21/25) on the bottom han-
dle (4) and the upper grip handle
(1).
4. Fold both handles down again.
The Bowden cable (5) must not be
jammed when you do this.
Non-observance of the storage
instructions may cause starting prob-
lems or permanent damage as a re -
sult of fuel residues in the carburettor.
7).