Herunterladen Inhalt Inhalt Diese Seite drucken

Checking/Sharpening/Replacing The Blade; Adjusting The Carburettor; Storage; General Storage Instructions - FLORABEST FBM 450 B2 Originalbetriebsanleitung

Benzin-rasenmäher
Vorschau ausblenden Andere Handbücher für FBM 450 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

GB
IE
NI
• Change the engine oil for the
ing hours then every 50 operat-
ing hours or annually.
• Dispose of the used oil in an eco-
friendly manner (see "Disposal/
Environmental protection").
1. Remove the spark plug connector (
12) (see "Maintaining the Spark Plug").
2. Open the oil tank cover (
pump out the motor oil with an oil
pump.
3. R
tion").
Checking/Sharpening/
Replacing the Blade
Only allow specialist companies to
install and dismantle the knife.
W ear gloves when handling the
blade.
Take off the spark plug connector (
12) and check the blade for wear and
damage.
Always have a blunt blade r esharpened
by a specialist company, as an imbal-
ance check can be carried out there.
Always have a specialist workshop
change a damaged or imbalanced
blade.
Incorrect installation can re-
sult in serious injury.

Adjusting the Carburettor

The carburettor has been preset in the fac-
tory for optimum performance. If readjust -
ments are required, have the adjustments
made by a specialist workshop.
14

Storage

-

General Storage Instructions

19) and
Clean and service the equipment before
storage.
Allow the engine to cool before storing
-
the equipment in enclosed areas.
Use suitable and authorised containers
for storing fuel.
Keep the equipment in a dry place that
is protected from dust and out of reach
of children.
Do not wrap the equipment in nylon
bags as damp and mould could form.

Fold up device

For space-saving storage the grip rod can
be folded twice.
P
Storage during the winter
break
Do not store the equipment
with a full collection box. In
hot weather, the grass begins
to ferment when heat is gen-
1. Remove the grass catcher (20).
2. Hang out the starter cord (
3. Open the quick clamping cable
levers (21/25) on the bottom han-
dle (4) and the upper grip handle
(1).
4. Fold both handles down again.
The Bowden cable (5) must not be
jammed when you do this.
Non-observance of the storage
instructions may cause starting prob-
lems or permanent damage as a re -
sult of fuel residues in the carburettor.
7).

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis