How To Activate The Rinse Aid Dispenser; Acoustic Signals - Electrolux ESL6362LO Benutzerinformation

How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
and the display is blank.
2. Press
.
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting: e.g.
3. Press
again and again to change
the setting.
4. Press the on/off button to confirm the
setting.
6.3 Use of rinse aid and multi-
tablets together
When you activate the option Multitab, the
rinse aid dispenser no longer releases
rinse aid. However if you are using multi-
tablets and the drying results are not
satisfactory, we suggest to use multi-
tablets and rinse aid together. In this case
you have to activate the rinse aid
dispenser.
The rinse aid dispenser will remain
activated until you modify the setting again
How to activate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
and the display is blank.
2. Press .
and
,
start to flash
and
continues to
= level 5.
and
,
start to flash
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting.
– = rinse aid dispenser
deactivated.
– = rinse aid dispenser
activated.
3. Press to change the setting.
4. Press the on/off button to confirm the
setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.

6.4 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
and the display is blank.
2. Press
• The indicators
off.
• The indicator
to flash.
• The display shows the current
setting:
– = Acoustic signal off.
– = Acoustic signal on.
3. Press
setting.
ENGLISH 27
and
continues to
and
,
start to flash
.
and go
continues
to change the