32
www.electrolux.com
How to set the water softener
level
Make sure the appliance is in user mode.
1. Press
• The indicators
and
• The indicator
• The display shows the current
setting: e.g.
2. Press
setting.
3. Press the on/off button to confirm the
setting.
6.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If the drying results are
satisfactory while using multi-tablets only,
it is possible to deactivate the notification
for refilling rinse aid. However, for best
drying performance, always use rinse
aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
Make sure the appliance is in user mode.
1. Press
• The indicators
• The indicator
• The display shows the current
setting.
–
.
,
are off.
still flashes.
= level 5.
repeatedly to change the
.
,
are off.
still flashes.
= rinse aid empty
notification activated.
–
notification deactivated.
2. Press
3. Press on/off to confirm the setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
Make sure the appliance is in user mode.
1. Press
• The indicators
are off.
• The indicator
flashes.
• The display shows the current
setting:
–
–
2. Press
setting.
3. Press on/off to confirm the setting.
6.5 AirDry
AirDry improves the drying results with
less energy consumption.
and
= rinse aid empty
to change the setting.
.
,
still
= Acoustic signal off.
= Acoustic signal on.
to change the
and