Electrolux EOG 21300 Gebrauchsanleitung Seite 32

32 electrolux
Please ensure that when the oven is
installed it is easily accessible for the
engineer in the event of a breakdown.
BUILDING IN
The surround or cabinet into which the oven
will be built must comply with these
specifications:
the dimensions must be as shown in the
relevant diagrams;
the materials must withstand a
temperature increase of at least 60°C
above the ambient temperature;
proper arrangements must be made of
a continuous supply of air to the oven to
prevent the oven overheating.
Dimensions of the oven and recess required
are given in the relevant diagrams (in
millimetres).
In highly ventilated rooms, it is
recommended to make a 130 cm
minimum opening in the oven
cabinet.
Built-under recess dimensions
(kitchen unit with feet)
Dimensions are given in millimetres
2
Built-under recess dimensions
(kitchen unit without feet)
Dimensions are given in millimetres
Securing the appliance to the cabinet
- Open the oven door;
- fasten the oven to the cabinet placing
the four distance holders "A" (supplied
with the appliance) which fit exactly
into the holes in the frame and then fit
the four wood screws "B" (not supplied
with the appliance).
When installing a hob over the oven, the
hob electrical connection and the oven one
have to be carried out separately for security
reasons and to let the oven be taken off the
cabinet easier, if necessary. Any extensions
must be made with cables suitable for the
required power.