Saddle - Mercedes-Benz Fitness Bike Sport and Comfort Betriebsanleitung

Detailed operating instructions
Saddle position – adjusting the angle
• Make the adjustments on a level sur-
face.
• Loosen the central fixing screw of the
seat post with the help of a 5 mm
Allen key. Turn the screw a maximum
of 2 turns anti-clockwise.
• You can now adjust the horizontal
position of the saddle and its angle.
• When tightening the screw, make sure
that the front tip of the saddle has only
a minimal dip towards the front to
ensure that the genital area is not
unnecessarily stressed while cycling.
• Tighten the fixing screw with the ap-
propriate torque (15-18 Nm).
• Stand to one side of the bike and
check from above whether the saddle
rocks by alternately applying pressure
to the tip and the rear of the saddle.
The position of the saddle should not
change.
54
Saddle replacement
Should you be considering replacing the
standard saddle, please note that the seat
post is intended for a saddle frame diameter
of 7 mm. Other frames may lead to failure of
the post and serious falls.
Important!
Always use a torque wrench. Torque
15-18 Nm.