Scheppach 7906100720 Originalbetriebsanleitung Seite 16

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Failure to comply with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
• Failures of the electrical system due to failure to
observe the national electrical requirements and
regulations
Note:
The operating manual is part of the product and contain
important information for safe, proper and economical
operation. Please also observe the applicable national
regulations. Read all operating and safety instructions
carefully before use and only use the product as de-
scribed. Keep the manual and pass it on when you give
the product to someone else.
2. Proper use
The compressed air sandblasting gun is designed for
removing rust and paint from metal surfaces.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about
potential dangers.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the product.
16 | GB
The product may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications of
the manufacturer, as well as the dimensions specified in
the technical data, must be observed.
Please note that our products were not designed with
the intention of use for commercial or industrial purpos-
es. We assume no guarantee if the product is used in
commercial or industrial applications, or for equivalent
work.
The manufacturer is not liable for damage caused by
improper use or incorrect operation.
3. Description of the product
1. Compressed air sandblasting gun
2. Plug nipple for air connection
3. Trigger lever
4. Blasting material container
5. Screw cap
6. Collecting bag for sandblasting material
7. Jet nozzle
7a. Outlet
8. Surface attachment
9. Point attachment
10. Outer edge attachment
11. Inner edge attachment
12. Blasting material
4. Scope of delivery
Item Quantity
1 1x
4+5 1x
6 1x
8 1x
9 1x
10 1x
11 1x
12 1x
1x
www.scheppach.com
Designation
Compressed air sandblasting
gun
Blasting media container with
screw-on fastening (pre-fitted)
Collecting bag for sandblasting
material (pre-fitted)
Surface attachment
Point attachment
Outer edge attachment
Inner edge attachment
Blasting material
Operating manual