Scheppach LBH3000E Originalbetriebsanleitung Seite 31

Leaf blowers
Sound power level L
WA
Sound pressure level L
pA
Uncertainty K
wa/pA
Vibration value per EN 60335-1:2012
Leaf blower
Vibration a handle
h
Vibration a front handle
h
Uncertainty K
h
Leaf blowers
Vibration a handle
h
Vibration a front handle
h
Uncertainty K
h
Warning!
In case of extended working periods, the operating
personnel may suffer circulatory disturbances in their
hands (vibration white finger) due to vibrations.
Raynaud's syndrome is a vascular disease that caus-
es the small blood vessels on the fingers and toes to
cramp in spasms. The affected areas are no longer
supplied with sufficient blood and therefore appear
extremely pale. The frequent use of vibrating devices
can cause nerve damage in people whose circulation
is impaired (e.g. smokers, diabetics).
If you notice unusual adverse effects, stop working im-
mediately and seek medical advice.
Observe the following information to reduce hazards:
• Keep your body and especially your hands warm in
cold weather.
• Take regular breaks and move your hands to pro-
mote circulation.
• Ensure as little vibration as possible at the device
via regular maintenance and stable parts on the ma-
chine.
8. Unpacking
104.5 dB
• Open the packaging and carefully remove the prod-
91.8 dB
uct.
3.0 dB
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
4.410 m/s²
recognised.
1.805 m/s²
• If possible, keep the packaging until the expiry of the
1.5 m/s²
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
4.596 m/s²
placement parts use only original parts. Spare parts
2.339 m/s²
can be obtained from your specialist dealer.
1.5 m/s²
• When ordering please provide our article number as
well as type and year of manufacture for the product.
m WARNING!
The product and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
choking or suffocating!
9. Assembly
Warning!
Only carry out maintenance, modification, adjustment
and cleaning work when the motor is switched off and
the mains is disconnected.
9.1 Fitting the blast/suction tube (Fig. 3, 4)
1. Insert the middle blast/suction tube (9) into the
motor housing (12).
2. Secure the centre blast/suction tube (9) with two
of the locking screws (A). Use a slotted screwdriv-
er for this (not included in the scope of delivery).
3. Insert the front blast/suction tube (11) into the
centre blast/suction tube (9).
4. Secure the front blast/suction tube (11) with two of
the locking screws (A). Use a slotted screwdriver
for this (not included in the scope of delivery).
Note!
The locking screws (A) cannot be removed after instal-
lation for safety reasons. This means that the blast/
suction tube can no longer be dismantled.
www.scheppach.com GB | 31