Scheppach GS55 Originalbetriebsanleitung Seite 26

The conductor core cross-section of the extension
cable must be at least 2.5 mm
whole cable off the reel before use. Check the cable
for damage.
• Do not unplug the shredder by the cable. Keep the
cable away from heat, oil and sharp edges.
m WARNING!
This electric tool generates an electromagnetic field
during operation. This field can impair active or passive
medical implants under certain conditions. In order to
prevent the risk of serious or deadly injuries, we recom-
mend that persons with medical implants consult with
their physician and the manufacturer of the medical im-
plant prior to operating the machine.
Residual risks
The machine has been built according to the state of
the art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• The use of incorrect or damaged mains cables can
lead to injuries caused by electricity.
• Release the handle button and switch off the ma-
chine prior to any operations.
• Even if you use this electric power tool in accord-
ance to instructions, certain residual risks cannot be
eliminated.
• Remaining hazards can be minimized by following
the instructions in „Safety instructions", „Intended
Use" and in the entire operating manual.
• Avoid accidental starts: do not press the start button
while inserting the plug into the socket.
• Use the tool that is recommended in this manual.
In doing so, your machine provides optimal perfor-
mance.
• Hands may never enter the processing zone when
the machine is in operation.
6. Technical data
Dimensions L x W x H
Blade cylinder Ø
Number of blades
Collection box capacity
Transport wheels Ø
Weight
26 | GB
. Always roll the
2
480 x 380 x 910 mm
180 mm
2
45 l
175 mm
10 kg
www.scheppach.com
Branch thickness max Ø
Motor
Nominal consumption P1
Revolutions max.
Operating type
Subject to technical changes!
Noise levels
Guaranteed sound power level L
Measured sound power level L
Measurement uncertainty K
Sound pressure level L
pA
Measurement uncertainty K
Note: The specified sound levels have been deter-
mined using a standardised test procedure and can be
used to compare different electronic devices. Further-
more, these values can be used to assess in advance
the strain on the user caused by the sound.
7. Before starting the equipment
m IMPORTANT!
You must fully assemble the appliance before us-
ing it for the first time!
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage
• Check the device and accessory parts for transport
damage. When complaints the dealer must be in-
formed immediately. Subsequent complaints will not
be accepted
• If possible, store the packaging until the warranty
period has expired
• Read the operating instructions to make yourself fa-
miliar with the device prior to using it.
• Only use original parts for accessories as well as for
wearing and spare parts. Spare parts are available
from your specialized dealer.
• Specify our part numbers as well as the type and
year of construction of the device in your orders.
45 mm
230-240V~ 50Hz
2400 W
4200 rpm
P40
106 dB
WA
103.8 dB
WA
2.46 dB
95.5 dB
3 dB
pA