Scheppach GS55 Originalbetriebsanleitung Seite 23

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we hope your new tool brings you much enjoyment and
success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• Failures of the electrical system due to failure to ob-
serve the national electrical requirements and regu-
lations.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the user
to become familiar with the machine and take advan-
tage of its application possibilities in accordance with
the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, profession-
ally and economically, how to avoid danger, costly re-
pairs, reduce downtimes and how to increase reliability
and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
The machine can only be operated by persons who were
instructed concerning the operation of the machine and
who are informed about the associated dangers. The
minimum age requirement must be complied with.In ad-
dition to the safety notices contained in this operating
manual and the particular instructions for your country,
the generally recognised technical regulations for the
operation of identical devices must be complied with.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information.
2. Device description
1. Loading slot
2. Machine body
3. Hook
4. Wheel
5. Wheel cap
6. Support feet
7. Reset switch
8. Threaded plug
9. On/Off switch
10. Mains power connection
11. Axle shaft
12. Washer
13. Wheel sleeve
14. Lock nut
15. Holes of the support feet
16. Groove
17. Threaded bolt
18. Aluminium cover
19. Blade
20. Countersunk screw
21. Collecting bag
a. Wrench
b. Allen wrench
c. Stopper
3. Scope of delivery
• Machine body
• Support feet (2x)
• Axle shaft
• Lock nut (6x)
• Wheel sleeve (2x)
• Washer (2x)
• Wheel cap (2x)
• Wheel (2x)
• Collecting bag
www.scheppach.com GB | 23