Scheppach HM254 Originalbetriebsanleitung Seite 24

• Improper use
• Failures of the electrical system due to failure to ob-
serve the national electrical requirements and regula-
tions.
Note:
The operating manual is part of the product and contain
important information for safe, proper and economical op-
eration. Please also observe the applicable national regu-
lations. Read all operating and safety instructions careful-
ly before use and only use the product as described.
Keep the manual and pass it on when you give the prod-
uct to someone else.
2 Proper use
The saw is used for the cutting of wood and plastic, ac-
cording to the machine size. The saw is not suitable for
cutting firewood.
WARNING
Do not use the product to cut materials other than those
described in the operating manual.
WARNING
The supplied saw blade is only intended for the sawing
of wood! Do not use this blade for sawing firewood!
Only suitable saw blades may be used for the product.
The use of any type of cutting wheels is prohibited.
The product may only be used in the intended manner.
Any use beyond this is improper. The user, not the manu-
facturer, is responsible for damages or injuries of any type
resulting from this.
An element of the intended use is also the observance of
the safety instructions, as well as the assembly instruc-
tions and operating information in the operating manual.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about po-
tential dangers.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the product.
The product may only be operated with original parts and
original accessories from the manufacturer.
The safety, operating and maintenance specifications of
the manufacturer, as well as the dimensions specified in
the technical data, must be observed.
Despite use as intended, specific risk factors cannot be
entirely eliminated. Due to the design and layout of the
product, the following risks remain:
• Contact with the saw blade in the exposed sawing ar-
ea.
• Reaching into the running saw blade (cutting injury).
• Kick-back of workpieces and workpiece parts.
• Saw blade breakage.
• Ejection of faulty carbide parts of the saw blade.
• Hearing damage when the necessary hearing protec-
tion is not used.
• Harmful emissions of wood dusts during use in en-
closed areas.
24 | GB
Please note that our products were not designed with the
intention of use for commercial or industrial purposes. We
assume no guarantee if the product is used in commercial
or industrial applications, or for equivalent work.
3 Product description (Fig. 1-24)
1. Handle
1a. On/off switch
1b. Switch lock
1c. LED on/off switch
2. Saw head
2a. Locking pin
2b. Sawing shaft lock
3. LED cutting line indicator
4. Saw blade guard (moving)
4a. Fixing screw
4b. Guide bar
5. Saw blade (48 teeth)
5. Saw blade* (60 teeth)
5a. Flange screw
5b. Outer flange
5c. Inner flange
6. Stop rail
7. Moveable stop rail
7a. Locking screw
8. Table inlay
8a. Phillips screw
9. Rotary table
9a. Handle / locking screw
9b. Adjustment screw
9c. Scale
9d. Pointer
10. Fixed saw table
11. Workpiece support
11a. Locking screw
11b. Longitudinal stop
12. Clamping device
12a. Locking screw (height adjustment)
12b. Knurled screw (height adjustment)
12c. Locking screw
13. Locking screw
13a. Angle scale
13b. Angle pointer
14. Slide rail
14a. Locking screw
15. Dust bag
16. Screw (cutting depth limit)
16a. knurled nut
16b. Stop
17. Tilt protection
18. Adjustment screw (90°)
18a. Locknut (90°)
19. Adjustment screw (45°)
19a. Locknut (45°)
20. Transport handle
21. Allen key, 6 mm
22. Allen key, 3 mm
* = may not be included in the scope of delivery!
4 Scope of delivery (Fig. 2)
Item Quantity
5. 1 x
5. 1 x
11. 2 x
12. 1 x
15. 1 x
www.scheppach.com
Designation
Saw blade (48 teeth)
Saw blade* (60 teeth)
Workpiece support (pre-assembled)
Clamping device (pre-assembled)
Dust bag