VEVOR RTP22WS115V Originalanleitung Seite 8

1. Turn on power.
2. Remove motor/tank cover assembly and hold level.
3. Test motor switch by raising motor switch float with finger (Figure 6). Motor
should turn on just before float contacts cover.
4. Test safety switch by raising safety switch float with finger. Safety switch should
activate before float contacts cover.
5 Replace motor/tank cover assembly on tank.
This pump is suitable for gas furnace condensate applications. Caution must be
taken to ensure acidity of condensate does not increase below the average pH of
3.4 (to prevent localized pocket of acid that acts like a battery causing pitting) by
routinely cleaning or flushing tank with fresh water.
TESTING
SPECIFICATION PARAMETER
Model
Input
Power
Q.max
H.max
RTP22WS115V
AC115V 60Hz
1/33HP
132GPH
22FT
- 8 -