Disassembling The Blender Jug And Removing Stubborn Residues - Gastroback Design Mixer Mini Bedienungsanleitung

5. Clean the lid and measuring cup in warm dishwater. Thereafter rinse the parts
with clear water.
6. Thoroughly wipe dry all parts. Thereafter, leave the parts of the appliance dry
naturally for approx. 30 minutes, where they are out of reach of young children.
Note:
In most cases, the blender jug will already be hygienically clean now. However, if
residues of food stick to the blade assembly still, you should disassemble the blen-
der jug for cleaning the parts.
Note:
You may clean the blender jug, lid, and measuring cup in an automatic dish-
washer. If possible, place the parts on the upper rack.
DISASSEMBLING THE BLENDER JUG AND REMOVING STUBBORN
RESIDUES
WARNING:
careful not to cut on the sharp blades and not to damage the blades. Glass may
crack easily, when handled carelessly. Please, use special care, when handling
glass parts to avoid damage and injuries caused by splinters and shards.
expose the glass body to extreme temperature variations to avoid cracking.
observe the maximum temperature for the glass body (60°C).
CAUTION:
use any abrasive cleaners. Otherwise the sealing surfaces of the blender jug could
get damaged!
IMPORTANT: The threaded sleeve could be screwed on very tightly.
re to turn the threaded sleeve counter-clockwise for disassembling the blender jug.
Handle the silicone seal with care to avoid damage.
Note:
You may clean all parts of the blender jug (glass body, blade assembly, silicone
seal, lid, and measuring cup) in the automatic dishwasher. If possible, place the
parts on the upper rack.
Use extreme caution when working in the area of the blades; be
Do not use any hard or sharp-edged objects for cleaning. Do not
Do not
Always
Always ensu-
53