Moving Parts-Risk Of Injuries - Gastroback Design Mixer Mini Bedienungsanleitung

and dry the appliance thoroughly and contact an authorised service
centre for examination.
• Always remove the blender jug from the motor base before filling the
blender jug or taking out your food. Ensure that the exterior of the
blender jug is always clean and dry, before placing it onto the motor
base to avoid risk of electric shock, overheating, and fire or damage
to the appliance.
MOVING PARTS—RISK OF INJURIES
WARNING:
speed within the blender jug. Thus, the appliance could cause high risk
of severe injuries and damage, when used improperly.
• The blades of the blade assembly are very sharp. Only touch the bla-
de assembly at the rim, when handling it.
• Do not attempt to operate the appliance without the blender jug
placed on the motor base. Do not attempt to remove the jug base
ring from the glass body. As well, the blade assembly may not be
disassembled. However, do not place the jug base ring and/or the
blade assembly onto the motor base without the glass body. Do not
touch the drive wheel in the motor base socket while the appliance is
connected to the power supply.
• Always turn the ON/OFF switch to ›0‹ (OFF) and wait until the blades
come to a complete standstill, before removing the blender jug from
the motor base. Please, take into consideration that the motor will still
be turning for a moment, after switching OFF.
• Do not leave the appliance switched on uselessly.
• Do not grasp into the blender jug or put any foreign objects (e.g.
cooking utensils, hair, brushes, or clothes) into the blender jug
with the blender jug placed on the motor base and the appliance
plugged in. Always remove the blender jug from the motor base,
before adding further ingredients or pushing the ingredients down on
the inner walls of the blender jug. Only use cooking utensils made of
wood, rubber, or plastics with the appliance to avoid damage to the
During operation, very sharp blades are moving on high
39