Configuration And Operation - ELCOM DBM-300 Bedienungsanleitung

Configuration and operation

Configuring call destination ranges to be read out in the display call module
Proceed as follows for configuration:
Configuration
Module Setup
Menu > Call destination ranges
Mod. Count/Range
> 3 / [21..40]
Selected call destination range
Languages for text displays / setting up the configuration menu
The display call module shows the user different status messages such as "Making call" or "Door open". These messages can be
set to the current local language or to a variable selection of languages. Proceed as follows for configuration:
Configuration
Text Languages
Menu > Display text languages
Text Languages
en de fr
Selected languages
Operation by the user and status messages
Miller
Select the entry using the arrow
keys. Hold the arrow key down to
run through the entries automat-
ically.
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
Error: Door speaker module busy
Open menu with the bell button
Save with the bell key
Open menu with the bell button
Save with the bell key
Miller

Call up the selected entry using
the bell button. The bell icon on
the display shows that the call is
being connected.
Please wait...
"Please wait" displayed perma-
nen-tly: Door module is not reg-
istered
Subject to technical changes
Mod. Count/Range
> 1 / [01..60]
Current call destination range
Text Languages
en de fr it nl
Current language selection
Connected
When the call has been connect-
ed to the unit dialled, "Connect-
ed" is displayed
Please wait...
[======= ]
"Please wait" + progress bar: Call
destination range is being read in
z
Change with arrow keys
Change with arrow keys
Conf iguration
Menu Language
Menu > Configuration language
Door is open
A door opener relay activation is
indicated with the message "Door
is open!".
No entries!
No call destination entries found
in the door speaker module.
9