Ensure that the rubber washer is in the valve
connector.
Attach the water inlet hose to the inlet valve
of the washing machine and to the
appropriate water connection (s. fig. on the
right).
Tighten the water inlet hose firmly to avoid
leakage.
Hot water connection (depending on model):
The model for the cold and hot water connection is equipped with two inlet
valves.
The inlet valve for the hot water connection as well as the water inlet hose have
a red marking.
A
Inlet valve for cold water
B
Water inlet hose for cold water
C
Inlet valve for hot water (incl. red marking))
D
Water inlet hose for hot water (incl. red marking)
Ensure that the rubber washer is in the valve connector.
Attach the water inlet hoses (colt / hot) to the appropriate inlet valves (s. fig.
above) and to the appropriate water connections (cold water supply / hot water
supply).
Tighten the water inlet hoses firmly to avoid leakage.
Cold water supply:
Washing machine:
58