Settings On The Hemtek St; Setting And Assembling Table Fastening - Leister HEMTEK ST Bedienungsanleitung

Fig. 1 Control panel (9) ST
19
22
25

5. Settings on the HEMTEK ST

5.1 Setting and assembling table fastening

Use only stable tables or workbenches that can support the load without tipping over.
Two persons are required to transport the welder.
Set table fastening
2 x socket head screws per foot
Clamping feet can be adjusted to the differ-
ent tables using the two socket
head screws.
20
21
24
23
21