Connecting The System - Oase Levelcontrol Gebrauchsanleitung

Connecting the system

• The valve line can be extended to a maximum length of 328 ft (100 m) by using an extension
cable (item number 87037). Do not extend the probe line!
• When assembling plug connectors, ensure that they are protected against reverse voltage.
• Always screw plug connectors to union nuts to ensure a secure connection and prevent mois-
ture from entering.
• Screw-connected plug connections may only be immersed temporarily, not permanently.
• Close any unused outputs on the controller with the cover cap.
• Route lines so that they are protected from damage and nobody can trip over them.
• Always disconnect the valve line on the controller connection, never on the connector.
24
LEV0431