Start-up
NOTICE
In an emergency, immediately disconnect electrical devices from the power supply.
If a unit has a power plug, it must be accessible so that it can be pulled.
For units with a permanently connected power cable, take suitable measures to ensure that
the unit can be disconnected from the power supply instantly.
Switching ON/OFF
How to proceed:
1. Check that the solenoid and venting valve are closed.
2. Insert the power plug into an outlet.
The system is switched on.
The control function starts after approx. 10 seconds.
Disconnect the power supply to switch off the unit.
EN
LEV0438
25