Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Thermocouple type.
2. IR temperature .
3. The displayed readings do not change.
4. Entering or Exiting Setup.
5. Primary Display: T1, T2, T3 , T1-T2,T1-T3,or T2-T3 reading.
6. Secondary Display: MAX, MIN, AVG, or offset,T1 or T2 ,T3
reading.
7. The temperature units. .
8. Thirdly Display :The elapsed time or T1, T2, T3 reading.
9. Low battery. Replace the batteries.
10. MIN:SEC or HOUR: MIN Display..
11. MAX, MIN, AVG display.
8. Operating Instructions
8.1. Selecting the temperature scale
Readings are displayed in either degrees Celsius (° C); degrees
Fahrenheit (° F) or Kelvin (K). When the thermo-meter is turned on, it is
set to the temperature scale that was in use when the thermometer
was last turned off. To change the temperature scale, press the
° C/° F/K-key.
8.2. Differences of temperatures
The input selection indicates which input is selected for display; T1
thermocouple, T2 thermocouple, T3 thermocouple, T4 thermocouple.
The difference between the two thermo-couples (T1-T2, T1-T3, T1-
T4).
-26-
Werbung
Inhaltsverzeichnis
