Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. The appliance must be correctly connected to the mains.
4. Switch on the appliance. The noise generated by the compressor and the
gases/liquids of the appliance is normal.
5. Do not store food in the appliance immediately after installation. Wait until the
appliance has reached the desired temperature.
1. Following factors will affect the cooling power of your appliance. The appliance
can only reach the relevant temperatures, when:
a. the average ambient temperature is between 10°C and 38°C.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in satisfactory condition.
e. the appliance is installed in a suitable place.
f. you do not overfill the appliance.
2. High ambient temperatures and simultaneously operating at the coldest settings
6/7 may make the compressor operate permanently to keep the temperature
constant inside the appliance.
3. Defrost the freezing compartment regularly.
8. CLEANING AND MAINTENANCE
Disconnect the appliance from the mains before you clean or maintain it.
Always keep the appliance clean so that unpleasant odours do not occur.
Do not touch the extremely cooled surfaces with wet or damp hands, because
your skin may stick on these surfaces.
Dust deposits on the condenser will increase the energy consumption. Clean the
condenser twice a year with a vacuum cleaner or a soft brush.
Take off all rings and bracelets before cleaning or maintaining the appliance;
otherwise you will damage the surface of the appliance.
Do not use any harsh, abrasive and aggressive detergents.
Do not use any solvents.
These instructions are valid for all surfaces of your appliance.
1. Use a moist cloth and a mild, non-acidic detergent. Use silicon wax for
stubborn stains and for periodic waxing.
2. Use clear water to rinse.
Operation parameters
WARNING!
Detergent
External cleaning
37
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
