Buttons And Functions - Co/Tech Fh201 Originalanweisungen

• The fan heater must only be connected to an electrical outlet with a 230 V, 50 Hz
power supply.
• The fan heater must not be placed directly below a wall socket.
• The fan heater must not be placed on or next to a stove, cooker hob or heat source.
• Do not leave the fan heater switched on unattended overnight.
• Before connecting the fan heater to the mains, make sure that it is turned off and
that your hands are completely dry.
• Do not use extension leads for this fan heater. Connect it directly to a mains outlet.
• The fan heater is intended for indoor use only.
• The fan heater must not be taken apart or modified. Certain uninsulated
components inside the housing carry dangerous voltages. Contact with these can
lead to fire or electric shock.
• The mains lead must be changed if damaged. This is to prevent the risk of electric
shock or fire and should only be carried out by the manufacturer, a qualified service
facility or qualified technician.
• Make sure to route the mains lead behind the fan heater so that it is not heated by
the hot air from the fan heater.
• Never use water or a wet cloth to clean the housing of the fan heater, doing so will
pose a risk of electric shock or short-circuiting.
• The fan heater must not be used in humid environments.
• Always let the fan heater cool down before moving it.
• The fan heater may not be controlled by an external timer or any type of remote control.
Warning: Do not cover. To avoid overheating, never cover the appliance.

Buttons and functions

1. Power indicator light
2. Thermostat knob
3. Function selector
Function selector symbols
• O Off
• Fan
• l Hot air (1000 W)
• ll Hot air (2000 W)
1
3
2 3