Sentiotec WC4-B-11 Installations- Und Gebrauchsanleitung Seite 34

Instructions for use for the user
Select the preferred value using the Minus
Press the Mode button
► The standby
► The set temperature for post-drying flashes in the display
default 80 °C)
Select the preferred value using the Minus
Confirm your selection using the ON/OFF button
9.21. Switching off the sauna controller
If you will not be using the sauna controller for an extended period of time,
switch it off at the main switch
10. Cleaning and maintenance
10.1. Cleaning
ATTENTION!
Damage to the unit
The sauna controller is resistant to splashing water, but direct contact with water
could still damage it.
● NEVER immerse the device in water.
● Do not pour water over the device.
● Do not get the device too wet when cleaning it.
1. Soak a cleaning cloth in a mild, soapy water.
2. Wring out the cloth well.
3. Carefully wipe the housing of the sauna controller.
10.2. Maintenance
The sauna controller does not require any maintenance.
11. Disposal
● Dispose of packaging materials in accordance with the applicable
waste disposal regulations.
● Used devices contain reusable materials as well as hazardous
substances. Therefore, do not dispose of your used device with
household waste, but do so in accordance with the locally appli-
cable regulations.
.
7
and temperature
8
.
b
and Plus
5 6
indicator lamps light up.
9
and Plus
5 6
.
4
p. 34/38
buttons.
(70–90 °C;
1
buttons.