Connections Of Input/Output Power Cables; Input Connection; Access To Terminal Block - Eaton Pulsar Mx Frame 15000 Rt Installations- Und Benutzerhandbuch

Connections of input/output power cables

This type of connection must be carried out by qualified electrical personnel
Before carrying out any connection, check that the upstream protection device Normal AC source is open ("O") (OFF)

Input connection

Access to terminal block

2. Installation
1 - Remove the 2 screws of the terminal
block cover (1).
2 - Pull up the moving tray (2).
3 - Pull out the moving tray (2).
4 - Pull down the moving tray (2).
34008486EN/AC - Page 23