Life Cycle Monitoring (Lcm); Description; Secure Your Installation Power Continuity; Reset Or Disable Lcm - Eaton Pulsar Mx Frame 15000 Rt Installations- Und Benutzerhandbuch

6. Life Cycle Monitoring (LCM)

Description

This function, embedded in the UPS, displays messages, on screen and communication channels, at every important
stage of the UPS's life, allowing you to:

Secure your installation power continuity

Anticipate maintenance actions thanks to automatically displayed warnings while displaying automatic warnings
when maintenance actions need to be planned :
LCM warning details
BATTERY CHECK RECOMMENDED
CONTACT EATON AT
www.eaton.com

Reset or disable LCM

In case of any LCM messages displayed:
For temporary reset: press the escape button more than 3 seconds, into Status and Alarm
temporary the alarm status.
The alert will be repeated twice each 30 days.
For permanent reset: press the enter button more than 3 seconds, into LCM warning screen, to cancel permanently
this LCM event.
At any time:
To Disable all LCM messages select "disable all" ,into LCM menu.
Be careful: you will not be aware of any LCM events that can happen on the UPS if you disable all LCM messages.
-
34008486EN/AC Page 38
1
I O
Signification
Battery is approaching its reliability end of life. Risk to reduce
dramatically backup time
Press the "Enter" button (1) to display LCM
warning details.
screen, to cancel