Ups Module Rack Mounting - Eaton Pulsar Mx Frame 15000 Rt Installations- Und Benutzerhandbuch

2. Installation

UPS module rack mounting

The battery sub-modules and power sub-modules must no be mounted yet.
It is not allowed to install the UPS or battery module in a hermetically closed environment without any exchange of
air.
Follow steps 1 to 4 for rack mounting the UPS onto the rails.
The rails and the necessary mounting hardware are supplied by EATON.
Note for step 1: it is possible to adjust the position of both front mounting ears.
-
34008486EN/AC Page 14