– Placing the vacuum cleaner freely in the area (outside the charging station) before
starting the mopping process is recommended.
– Use the mopping function only when the vacuum cleaner is fully under control. Do
not use the delay start function or remote control (outside your home) for mopping.
– Only use the mop extension on hard floors - not on carpets! After mopping and
before charging remove the mop tank and empty it.
– Filling the tank of the mop extension ensures a full wiping of approx. 40 m
floors
6. VACUUM CLEANER MAINTENANCE
Carry out maintenance and cleaning regularly, depending on the frequency of use and
the amount of cleaning. In a more polluted environment (a pet household), more frequent
maintenance will be required. Failure to carry out maintenance may damage the
vacuum cleaner and its components!
6.1 CHARGING CONTACTS CLEANING
Switch off the vacuum cleaner and disconnect the charging station from the power
supply! Clean the charging contacts (A7, C4) on the vacuum cleaner and on the station
with a soft dry cloth. Clean at least once a month. Do not use aggressive cleaning
agents or oils to clean the contacts.
6.2 DIRT TANK AND FILTERS CLEANING
1. Remove the dirt tank B1 from the vacuum cleaner.
Remarks
GB - 67
GB
of the
2