eta RAGGIO Bedienungsanleitung Seite 59

4.2 CHARGER STATION INSTALLATION
1. Place the charging station on the floor. Make sure there is enough space on the sides
of the base (at least 0.5 m) and in front of the base (at least 1.5).
2. Connect the adapter to the charging station and then to the wall outlet. (the indicator
lights up C1).
5. VACCUM CLEANER USE
At first glance, the ETA Raggio robotic vacuum cleaner is an ordinary robotic
vacuum cleaner with common vacuum functions. However, our model is unique
to use together with the "ETA RAGGIO" application, which extends the vacuum
cleaner functionalities and potential. Without using the application, the vacuum
cleaner is fully functional and can be used in basic modes (automatic and local
cleaning + return to charging station), however for its full use and comfort we
recommend using and control (e.g. from your work) with the app.
5.1 BATTERY CHARGING
1. Check that the charging station is properly connected to the mains. (light C1 must be on).
2. Remove the dirt tank B1 and set the A19 switch to the "ON" position. Then put the dirt
tank back into the vacuum cleaner.
NOTICE
GB - 59
GB