eta RAGGIO Bedienungsanleitung Seite 68

GB
2. Open the lid and empty the dirt. Dispose of dirt together with normal household waste.
3. Clean the dirt tank with the tool F (or other suitable).
4. Remove the filters from the dirt tank and clean them with tool F (or other suitable). Blow
or knock the HEPA filter B4 gently. The foam filter B5 and protection filter B6 can be
rinsed under running water. If the dirt tank becomes dirty, you can also rinse it under
running water. Allow everything to dry thoroughly before reuse!
– For filters cleaning do not use aggressive detergents or cleaning agents or hot water
– Dry cleaning is recommended to maintain HEPA filter parameters.
– If you choose to wash the HEPA filter with water, its filtering ability will be reduced.
– The maximum number of filter washes is 3x. Then it is necessary to buy a new one.
– It is recommended to change the HEPA filter at least twice a year.
– The filters are not intended for use in a dishwasher.
– Cleaning failure and possibly filters replacing can lead to malfunction of the vacuum
cleaner!
5. After maintenance, remove the dirt tank including filters and put it back in the vacuum
cleaner.
NOTICE
GB - 68